ICE FUSE installed on a Porsche 911 (air-cooled 964 model)

Recommended Car Accessories

A while ago, my husband wrote an article about the installation of something called ICE FUSE, which I would like to share with you.


The other day, I was looking at a social networking site calledICE FUSE on an air-cooled Porsche.I found a post that said, "I've got a 964". I immediately checked it out and found that it looked quite interesting, so I ordered one and installed it on my air-cooled 911 (964 model).

ICE FUSE

ICE FUSEindicates word or phrase being definedTuning fuse with cryogenic cooling treatment technology.The idea is to freeze the metal in liquid nitrogen at -196°C to tidy up the atomic arrangement of the metal, thereby improving conductivity, sponce, and acceleration feel.

Originally, cooled fuses were used in the world of acoustics to improve sound quality, and this has now been applied to cars.

ICE FUSE for Porsche

I looked for ICE FUSE for Porsche to try it out as soon as possible, and found that it is available.Agents.They said they had one for 964 and one for 993, so I immediately ordered the 964.

ICE FUSE for Porsche

After placing the order, the president of the recipient contacted me.We are very close by and can hand-deliver if you'd like.He said, "I'm a good friend. When I looked at the address, I saw that it really is a neighborhood. I had always wondered about this place because I often see Porsche cars parked there.

I was surprised to find out that he is a well-known president in the Porsche RWB area, that he comes to Ashiyu from time to time, and that we have several mutual acquaintances. The connections that Porsche has are, as always, amazing.

We exchanged a lot of information about cars and business, and left the meeting. I would like to have a chance to talk with him again once Corona is settled.

ICE FUSE installed on Porsche 911

Installation of ICE FUSE is very easy.In the case of the 964, you have to remove the carpet above the front trunk space and open the fuse box there.

As a precaution, we turn off the battery terminal to avoid an unexpected short circuit and get to work.

There are many fuses lined up inside, but all you have to do is pull out the one to be replaced and replace it with an ICE FUSE, referring to the instructions that come with the unit.

As long as you don't drop or lose the fuse, it will only take about 10 minutes.

How effective is ICE FUSE?

After the replacement, I immediately took it for a test drive to see how it feels. By the way, this article is not an advertisement for ICE FUSE, nor is it an advertisement for ICE FUSE.I simply reviewed what I personally purchased with my own money.I will say no to that.

On what I felt was clearly different.

  • The engine started powerfully. It was starting with a "curcuito, bobo."The engine now starts with a "curcuru-curcuru, bwon! The engine started to run briskly.Tachometer needle jumps up a little higher than usual when starting
  • The sound quality of the car stereo has changed.This is quite clear. The treble part in particular is firm, and the sound is less muffled.
  • Lights are brighter.

About what you feel might have changed

  • The engine rev feeling is smooth. This is especially evident when the air conditioner is turned on. When the air conditioner compressor runs, the power feels somewhat reduced, but this is better.
  • The Tiptronic (AT) seems to shift faster. This is due to the fact that the "have a certain mood or feelingThe level of "I'm not sure how much I can change gears, but I think I have a stronger feeling of changing gears quickly.

Also, I didn't notice much difference in the general feeling of power, but at least the engine has a better rev feeling, which makes it more pleasant to drive.


Compared to ordinary fuses, these fuses are a bit more expensive, but if you have a 964 or 993, why not give them a try to freshen up your car?

ICE FUSE Recommendation
3.7 out of 5 stars (3.7 / 5)

Hiro

I am Mina's husband. We don't drive cars for fashion or status symbols. We like cars that are fun to drive, are good industrial products, and have a sense of the maker's intention...

Profile

Follow me if you like this blog!

Close Comment
  • Comment ( 0 )

  • Trackbacks are closed.

  1. No comments yet.